🎯 Anti-Recoil

Anti-Recoil automatically compensates for weapon recoil to help keep your aim steady. You can choose from simple one-value modes to advanced, timing-based setups for maximum precision.

Required Settings for Anti-Recoil

To ensure Anti-Recoil functions correctly, make sure the following settings are enabled:

In-Game Settings (Call of Duty):

  • Settings → Controller → Controller Vibration → On
  • Settings → Controller → Controller Vibration → Controller Vibration Intensity → 100

For PS5 console and PS5 controller on PC:

  • Settings→ Controller menu → Trigger Effect → Full Haptics

System Settings (Console/PC):

🔘 Modes Explained

  • Off – Disables anti-recoil.
  • Basic – Uses a single Strength value for simple recoil control.
    • Strength – Main anti-recoil value
  • Advanced – Adds an initial kick stage for finer control:
    • Strength – Main anti-recoil value
    • Kick Strength – Initial value applied for the duration of Kick Time
    • Kick Time – Duration before switching to main Strength
  • Expert – Full customization for vertical and horizontal recoil across three stages:
    • Start Strength – Applied for the duration of Start Time
    • Mid Strength – Applied for the duration of Mid Time (after Start Time ends)
    • End Strength – Applied after Mid Time ends
    • Start Time – Duration for Start Strength
    • Mid Time – Duration for Mid Strength
  • Weapon Select – Lets you manually pick the weapon profile you’re using.
    • Best for multiplayer or when you have a set primary and secondary loadout (e.g., Warzone, Rebirth, DMZ).
    • Each profile has its own Vertical and Horizontal values, adjustable to match your sensitivity and aim response curve settings.
  • Automatic – Automatic detection of weapon or weapon category.
    • Uses a universal Vertical Value (based on your sensitivity and/or aim response curve).
    • Horizontal Value is only available on PS5 console or PS5 controller on PC.

Tuning Tip #1

  • If your weapon pulls down too much → Decrease Recoil Value.
  • If your weapon pulls up too much → Increase Recoil Value.

Tuning Tip #2

The specific value you adjust depends on the Anti-Recoil mode you’re using:

  • Basic → Adjust the Strength value
  • Advanced → Adjust Strength and Kick Strength
  • Automatic / Weapon Select → Adjust the Vertical and Horizontal values.

Tuning Weapon Select / Automatic

  • Turn Aim Assist / Strafe Assist → Off.
  • Always tune Vertical first.
    • If your weapon pulls down too much → Decrease Vertical Value.
    • If your weapon pulls up too much → Increase Vertical Value.
  • Start with Horizontal really low (at -100%)
    • Slowly increase Horizontal until weapon stays straight.
    • Some cases your Horizontal value may be really low, or it could be really high
  • When tuning Automatic, pick any weapon with only a red dot sight and extended magazine and enter a Custom match.
    • Perform the same steps listed above.
    • Automatic is only recommended for Ground Loot.
    • Automatic cannot work in the Firing Range as the game does not provide adaptive trigger data. Use Custom match!

🎮 Quick Controls

Quick Controls are button shortcuts that let you adjust Anti-Recoil on the fly without opening the script menu.

🔄 Automatic Mode

  • Hold ADS + Share/View → Cycles to next weapon in the weapon group (if grouped).
  • Hold ADS + Hold Share/View → Goes straight to Vertical Adjustment.

📦 Weapon Groups

Important

Automatic Weapon Detection on PS5 console or when using a PS5 controller on PC depends on adaptive trigger data. Some weapons generate identical trigger values, so the script cannot always determine which weapon you’re using.

In these situations, after firing your weapon once, hold ADS and press Share/View to cycle through the weapons in that group.

The table below shows the weapons included in each group.

Group Weapons
Group 1 ABR A1, GPR 91
Group 2 AK-74, CR-56 AMAX, Goblin Mk2, Krig C, Model L
Group 3 AMES 85, Kilo 141
Group 4 KSV, LC10
Group 5 Nailgun, Sirin 9mm
Group 6 PPSh-41, Saug
Group 7 Marine SP, Olympia
Group 8 PML 5.56, XM4

🎯 Weapon Select Mode

  • Hold ADS + Share/View → Opens weapon select screen.
  • Hold ADS + Hold Share/View → Goes straight to Vertical Adjustment.

⚙️ Strength Adjustment (Basic / Advanced / Expert)

  • Hold ADS + Share/View → Opens the Strength adjustment menu for the current mode (Basic, Advanced, or Expert).